ai rcooling bend
|
|
transformer
|
induction
|
|
|
coil
|
clamp
|
|
|
longbend arm
|
interface
|
|
|
customer site2
|
customer site 5
|
|
|
customer site1
|
cutomer site4
|
|
|
customer site 6
|
|
drawing
YWG type hydraulic pipe bending machine is for petrochemical, electric power, urban construction project construction, the importance of pipe bending device, its working principle is : steel pipe is heated by the intermediate frequency power supply,at the same time the steel pipe be pushed at a constant speed , make the heating part of the steel pipe to walk along a predetermined path to form a certain curvature radius and bend Angle. Steel pipe is settled first, then via the radial rotary device of screw gearing adjust good bending radius, by using mediium frequency induction heating coil ,steel pipe bend after heated to a certain temperature, powered by hydraulic bending, steel pipe be pushed forward, the bending radius adjusted at heat deformation and bending, deformation of steel pipe and the water spray cooling, bending radius and dynamic bending Angle can be displayed on the touch screen, finally to obtain the required Angle of bend.
No |
Item |
unit |
Parameter (range) |
1 |
Pipe size |
Inch |
6"~52" |
2 |
Max wall thickness |
SCH |
XXS |
3 |
Bending Angel |
Degree |
0---180 |
4 |
Bending Radius |
KN |
3D---10D |
5 |
Stoke of main cylinder |
mm |
3000---10000mm |
6 |
Main pressure |
Mpa |
21 |
7 |
Run fast speed |
M/MIN |
1M/min |
8 |
Clamp run speed |
M/MIN |
2M/min |
9 |
Hydraulic system |
液 |
TAIWAN |
|